Setting The Light Barrier - DURKOPP ADLER 911-211 Service Instructions Manual

4.6.2 Setting the light barrier

Proper setting
The light barrier with its mounting plate must be installed so that the
toothed rack triggers it before reaching the upper stop.
1. Use the Multitest program to test the setting.
 The distance between the bottom edge of the mounting plate and the
Fig. 28: Setting the light barrier
Cover
• Head cover (
• Motor cover ( 3.3.2 Removing and installing the motor cover, p. 11)
32
stroke position housing should be approx. 3.5 mm.
①
②
(1) - Mounting plate
(2) - Light barrier
 3.3.4 Removing and installing the head cover, p. 12)
WARNING
Risk of injury!
Risk of crushing injuries and stab wounds from
sharp and moving parts.
Test and adjust the light barrier only with very
great care.
(3) - Screw
(4) - Lever
Service Instructions 911-211 - 00.0 - 02/2015
Machine head
④
3,5 mm
③