Available Settings At A Glance; Available Settings At A Glance - ViewSonic SC-T47 User Manual

Configuring Client Settings
Configuring System Settings
4.2.2

Available Settings at a Glance

Tab Setting
Password
Firmware
Update
Snapshot
System
Appliance
Mode
UWF
NOTE
• ViewSonic Device Manager is a remote and mass client management console,
helping you remotely mange a large number of endpoint devices in a desktop
virtualization infrastructure. For more information about ViewSonic Device Manager,
please refer to the User's Manual for ViewSonic Device Manager.
Icon
Click to configure the access privileges of
ViewSonic Client Setup for client users.
Click to configure settings for remote assistance.
Click to update firmware locally with the help of
a remote management computer. This feature is
only applicable when the client is managed by
the ViewSonic Device Manager console.
Click to take a snapshot (system image) of the
client for mass deployment.
Click to enable/disable the Appliance mode to
allow/disallow the automatic RDP / ICA / View
sessions. In Appliance mode, the client starts up
with the desired RDP / ICA / View session and
shuts down when the user logs out.
Click to configure UWF (Unified Write Filter)
settings. Enabling UWF option will redirect all
writes targeted for disk volumes to a RAM cache.
All system changes will only affect the session
where the changes are made.
30
Description Section Page
4.2.3 31
4.2.4 33
4.2.5 34
4.2.6 37
4.2.7 38
4.2.8 41
4.2.9 45