ViewSonic SC-T47 User Manual page 87

RemoteFX USB redirection
Click to enable/disable locally attached RemoteFX USB devices.
NOTE: To use RemoteFX USB devices in remote desktops, you need to configure
the policy setting about device redirection to allow RemoteFX USB Device
Redirection as well. To do so, please follow the steps below:
1. Log in to your SC-T47 with an administrative account.
2. Disable UWF (Unified Write Filter) through ViewSonic Client Setup
(See "4.2.9 Configuring UWF (Unified Write Filter)" on page 45).
3. On the desktop or Start screen, move your mouse to the bottom-right
corner. The charms appear.
Charms: Search, Share, Start, Devices, Settings
4. Click Search to select the Search charm.
5. Type group policy in the Search charm, and then click Settings.
Edit group policy appears on the left.
6. Click to select Edit group policy.
7. On the opened window, select Computer Configuration >
Administrative Templates > Windows Components > Remote
Desktop Services > Remote Desktop Connection Client >
RemoteFX USB Device Redirection > Allow RDP redirection of
other supported RemoteFX USB devices from this computer.
8. Select Enabled and to which users this setting applies: Administrators
Only or Administrators and Users, and then click OK.
9. Enable UWF through ViewSonic Client Setup.
77
Configuring Client Settings
Configuring Service Access Settings