ViewSonic SC-T47 User Manual page 46

Configuring Client Settings
Configuring System Settings
Firmware Update Options
Item
Firemware Type
Firmware Version
Language
Reboot immediately
Keep VCS configuration
5. Click Update firmware to confirm your selections. The system will start updating its firmware after restart.
Click to select the desired firmware type.
Type Description
ALL All firmware types, Firmware and Snapshot.
Firmware The system image of a client.
Snapshot The system image of a client coming from another client of the same model.
Click to select the desired firmware version from the Firmware list.
Click to select the interface language of the system, including the ViewSonic
Client Setup console.
NOTE: Available languages may vary with the firmware version.
Click to choose whether to restart the system immediately for firmware update
or manually restart the system later.
Click to choose whether to keep client settings under ViewSonic Client Setup.
NOTE: If Yes is selected, all client settings under ViewSonic Client Setup will
remain unchanged after firmware update.
If No is selected, all settings will be restored to the factory default.
NOTE: If the client is managed by ViewSonic Device Manager and here No is
selected, ViewSonic Device Manager will fail to manage the client after
firmware update. For more information on ViewSonic Device Manager,
please refer to the User's Manual for ViewSonic Device Manager.
36
Description