ViewSonic SC-T47 User Manual page 50

Configuring Client Settings
Configuring System Settings
With a Snapshot on a USB Flash Drive
To deploy a system image on your SC-T47 with a snapshot on a USB flash drive, please do the following:
1. Plug the USB flash drive into a free USB port of the client.
2. Start up or restart the client.
3. During the period of POST (Power-On Self-Test), press F7 to enter the Boot Device menu.
4. Select to boot from the attached USB flash drive.
5. The ViewSonic Thin Client Recovery System is launched.
6. Select USB, and then click Next to continue.
7. The recovery system start deploying the snapshot to the client.
8. After completion, click Finish to restart the client.
40