Configuring Client Settings
Configuring System Settings
Setting Access Privileges and Password Also for Standard Users
To set access privileges and password also for standard users, please do the following:
1. On ViewSonic Client Setup, click System > Password.
2. Under the User section, click to check Use Password.
NOTE
• The User section appears only when Active Admin Authorization is checked.
3. The access privileges for standard users are granted and a window appears for you to set the password.
4. Type in the desired password, and then click Save to apply.
5. Click Save to store all the changes.
NOTE
• For standard users of your SC-T47, two set of credentials are required to access
ViewSonic Client Setup: one set of credentials is administrator credentials for
Windows Embedded 8 Standard; the other is standard user credentials for ViewSonic
Client Setup.
32