Ricoh CL7000 Setup Manual page 90

Installing Options
E E E E
Hang the auxiliary bar on the far
left end, as shown, and then install
the stopper removed in step
4
Make sure the auxiliary bar and
stopper are installed in the posi-
tions, as shown.
F F F F
Slowly raise the duplex reversal
unit, and then fold it up to the
printer.
G G G G
Remove the adhesive tape hold-
ings the cable, and then connect
the cable from the duplex reversal
unit to the upper connector on the
back of the printer.
78
This completes installation of the
duplex reversal unit. Install the
duplex feed unit after the external
B B B B
.
tray.
H H H H
Install the external tray.
A Stand the external tray, and
then insert it from the left side
using both hands.
ZDJP049J
B Pushing the right edge of the
external tray lightly with your
finger (A A A A ), insert it (B B B B ).
ZDJP050J
C Lower the external tray toward
you.
ZHXH260J
ZHXH270J
ZDJP053J
ZHXH280J