1394 Interface Unit Type 4510 - Ricoh CL7000 Setup Manual

Installing Options

1394 Interface Unit Type 4510

Important
❒ Printing using "1394/SCSI Print-
er" (Windows 2000) device and
"IEEE 1394 and SCSI printers"
(Windows XP) with the optional
1394 interface unit is possible un-
der Windows 2000 and Windows
XP. Printing with IP over 1394 is
possible under Windows Me and
Windows XP.
❒ Printing is not possible with Win-
4
dows 95, 98. If the "plug and play"
function starts, click [Cancel].
❒ Under Windows 2000, the 1394 in-
terface unit can only be used with
Service Pack 1 or later. If the Ser-
vice Pack is not installed, only one
SCSI print device in a 1394 bus is
connectable. The client cannot in-
stall the printer driver without an
account that has Administrators
permission.
❒ Before handling the 1394 interface
unit, ground yourself by touching
something metal to discharge any
static electricity. Static electricity
can damage the 1394 interface unit
❒ Unplug all interface cables from
the printer before installation. If
you take out the controller board
with cables still plugged in, the
1394 interface unit might be dam-
aged.
❒ Do not plug or unplug the 1394 in-
terface cable while installing the
printer driver
❒ Use the 1394 Interface cable sup-
plied with the 1394 interface unit.
❒ Do not subject the 1394 interface
unit to physical shocks.
48
A A A A
Check the contents of the box.
❖ ❖ ❖ ❖ 1394 Interface Unit Type 4510
❖ ❖ ❖ ❖ Interface Cable (6 pin × × × × 6 pin)
❖ ❖ ❖ ❖ Interface Cable (6 pin × × × × 4 pin)
B B B B
Turn off the power, and then un-
plug the power cable, and then in-
terface cable.
C C C C
Slowly open the front cover of the
printer, remove the green screw-
driver, and then close the cover.
Reference
p.37 "Using the Screwdriver"
ZHBP400E