Figure 3: Method 2 - Configure Outbound Rule on the UCM6100
In this example "91XXXXXXXXXX", 9 is the first dialing digit and it will be stripped off when the call goes
out.
Configure Inbound Rule on UCM6100
On the UCM6100 web GUI, go to PBX->Basic/Call Routes->Inbound Routes to create a new inbound
rule.
In this example, we create the DID as 20000, which will be used in the GXW410X call forward setting.
Firmware Version 1.4.1.4
Configuring UCM6100 Series with GXW410X
Page 5 of 18