Panasonic KX-NS700 User Manual page 26

1.1.5 Before Operating the Telephones
desired no.
extension no.
phone no.
HOLD
When You Use a Panasonic Proprietary Telephone or KX-UT Series SIP
Phone
Panasonic proprietary telephones and KX-UT series SIP phones have useful feature buttons that simplify some
operations. For details, refer to the "Location of Controls" or equivalent section in the documentation for your
phone.
Customised Buttons
If the term is in parentheses like (Account) in this manual, it means a flexible button has been made into an
"Account" button. For more information, refer to "3.1.3 Customising the Buttons" when using a PT or PS, or
"Customising the Flexible Buttons" when using Web Maintenance Console.
Note
For KX-UT series SIP phone users:
•
KX-UT113/KX-UT123: Customised buttons are not available.
•
Other than KX-UT113/KX-UT123: The following buttons can be customised:
–
Single-CO (S-CO)
–
DN
–
One-touch Dialling
–
Log-in/Log-out
–
DSS
Button
Loop-CO (L-CO)
Group-CO (G-CO)
Single-CO (S-CO)
26 User Manual
Enter the required number.
<Example>
account code
Enter the account code.
Dial an extension number.
Dial the telephone number.
Press the HOLD button on your SIP
phone.
Used to access an idle outside line for making outside calls.
Incoming outside calls from any outside line arrive at this button.
Used to access an idle outside line in a specified outside line group for
making outside calls.
Incoming calls from outside lines in the assigned outside line group arrive
at this button.
Used to access a specified outside line for making or receiving outside
calls.
You will hear a busy,
confirmation, dial, ring or
ringback tone.
B. Tone: Busy Tone
C. Tone: Confirmation Tone
D. Tone: Dial Tone
R. Tone: Ring Tone
R. B. Tone: Ringback Tone
Dial outside phone number.
outside
phone no.
Press any dial key (0–9,
dial key
Press the REDIAL button on
REDIAL
your SIP phone.
–
Headset
–
Wrap-up
–
Call Park
–
Call Park (Automatic Park Zone)
Feature
, #).