Utilising The Call Centre; Leaving An Incoming Call Distribution Group (Log-In/Log-Out, Wrap-Up) - Panasonic KX-NS700 User Manual

1.10 Utilising the Call Centre

1.10.1 Leaving an Incoming Call Distribution Group (Log-in/
Log-out, Wrap-up)
You can control your status in an incoming call distribution
group. When in the Log-out mode, incoming calls to the
group will not ring at your extension. When you return, calls
will again ring at your extension. (Default: Log-in) Even if
your extension is logged-in, you can have a specified time
period (wrap-up time) when you will not receive calls after
completing a previous call. This time can be used for you
to write a report and so on.
You can also manually select "Not Ready" mode to
temporarily leave a distribution group.
To set Log-in/Log-out
PT/SLT/PS/SIP Extn.
Off-hook.
ICD Group
extension no.
OR
Enter ICD Group extension
number or

1.10.1 Leaving an Incoming Call Distribution Group (Log-in/Log-out, Wrap-up)

ICD Group: Incoming Call Distribution Group
7 3 6
Enter 736.
Specified
C.Tone
All
.
Talk.
Wrap-up
0
Log-out
OR
1
Log-in
Enter 0 or 1.
On-hook.
Log-in
Ready
Not Ready
User Manual
Log-out
217