Fan - HP EliteOne 800 G1 Maintenance & Service Manual

Fan

Description
Fan
The fan is located near the middle of the computer and is secured with three Torx screws. You have to
remove the VESA mounting adapter to remove the fan.
To remove the fan assembly:
1.
Prepare the computer for disassembly (see
2.
Remove the access panel (see
3.
Remove the stand (see
4.
Remove the lower panel (see
5.
Remove the VESA mounting adapter (see
6. Disconnect the fan cable from the system board connector labeled CHFAN (1).
7. Remove the three Torx screws that secure the fan to the computer (2).
80 Chapter 5 Removal and Replacement Procedures All-in One (AIO) Chassis
Preparing to disassemble the computer on page
Access panel on page
Stand on page 41).
Lower panel on page
VESA mounting adapter on page
39).
44).
Spare part number
698196-001
35).
45).