Removal And Replacement Procedures All-In One (Aio) Chassis; Preparing To Disassemble The Computer - HP EliteOne 800 G1 Maintenance & Service Manual

5 Removal and Replacement
Procedures All-in One (AIO) Chassis
The following sections provide information about disassembling various components of the computer.
NOTE:
HP continually improves and changes product parts. For complete and current information on
supported parts for your computer, go to http://partsurfer.hp.com, select your country or region, and
then follow the on-screen instructions.

Preparing to disassemble the computer

To avoid injury and equipment damage, always complete the following steps in order, when opening
the HP Pro All-in-One.
1.
Remove all media from the computer.
2.
Shut down the computer.
3.
After the system has completely shut down, disconnect the power adapter from the back of the
computer.
4.
Disconnect all other attached cables from the back of the computer.
Preparing to disassemble the computer
35