HP EliteOne 800 G1 Maintenance & Service Manual page 61

6.
Remove the four mounting screws from the 2.5-inch hard disc drive adapter. Be sure to keep the
screws together with the blue rubber grommets to use to install a replacement drive.
NOTE:
The primary drive is the lower position in the drive cage. If only one drive is to be
installed, it must occupy this position.
7.
Remove the 2.5-inch hard disc drive(s) from the 2.5-inch drive adapter.
For instructions on installing a hard disc drive, see Installing a hard disc drive on page 52.
Drives
51