Power Button Board - HP EliteOne 800 G1 Maintenance & Service Manual

Power button board

Description
Power button board
The power button board is located on the bottom left corner of the computer. It is covered by a Mylar
shield and has two connectors and one screw.
To remove the power button board:
1. Prepare the computer for disassembly (see
2. Remove the access panel (see
3. Remove the stand (see
4. Remove the lower panel (see
5. Remove the optical drive (see
6. Remove the left side panel (see
7. Remove the speakers (see
98 Chapter 5 Removal and Replacement Procedures All-in One (AIO) Chassis
Preparing to disassemble the computer on page
Access panel on page
Stand on page 41).
Lower panel on page
Replacing the optical disc drive on page
Side panels on page
Speakers on page 79).
39).
44).
56).
82).
Spare part number
732490-001
35).