Removing A 2.5-Inch Hard Disc Drive - HP EliteOne 800 G1 Maintenance & Service Manual

4.
Lift the latch on one side of the drive cage and pull the hard disc drive out of the cage.
5. Remove the four mounting screws from the 3.5-inch hard disc drive. Be sure to keep the screws
together with the blue rubber grommets to use to install a replacement disc drive.
For instructions on installing a hard disc drive, see

Removing a 2.5-inch hard disc drive

1. Prepare the computer for disassembly (see
2. Remove the access panel (see
Installing a hard disc drive on page
Preparing to disassemble the computer on page
Access panel on page 39).
52.
35).
Drives
49