HP EliteOne 800 G1 Maintenance & Service Manual page 116

6.
Remove the VESA mounting adapter (see
7.
Remove the power supply (see
8.
Remove the speakers (see
9.
Remove the side panels (see
10.
Remove the front bezel (see
11.
Disconnect the backlight cable from the display panel.
NOTE:
display panel kit.
Remove the backlight cable from the defective panel before sending the panel back to the
supplier.
12.
Remove the four Torx screws that secure the display panel to the frame.
13. Lift the display panel from the frame.
106 Chapter 5 Removal and Replacement Procedures All-in One (AIO) Chassis
Power supply on page
Speakers on page
Side panels on page
Front bezel on page
Replace the backlight cable with the new backlight cable that comes with the new
VESA mounting adapter on page
84).
79).
82).
100).
45).