Power Button Board - HP VR Backpack G2 Maintenance And Service Manual

Power button board

Table 5-9 Power button board description and part number
Description
Power button board
Before removing the power button board, follow these steps:
1. Prepare the computer for disassembly
2. Remove the top cover (see
3. Remove the graphics fan (see
4. Remove the WLAN antenna (see
Remove the power button board:
1. Remove the Phillips M2.5 × 4.5 screw (1) that secures the power button cover to the computer.
2. Remove the cover from the computer (2).
3. Disconnect the power button board cable from the power button board (1).
(Preparation for disassembly on page
Top cover on page 14).
Fans on page 16).
WLAN antenna on page
Spare part number
L63399-001
14).
21).
Component replacement procedures 27