Wlan Related Commands - ZyXEL Communications P-660R-T1 Support Notes

8. WLAN Related Commands

Wlan
active [on|off]
association
load
Display
chid
essid
hiddenssid
threshold
rts
Fragment
wep
type
Key
Key
macfilter
Enable
Disable
Action
Set
Clear
Save
Power
reset
1130cmd
restart_stat
chg_dot11mode
show_rxDesc
All contents copyright © 2005 ZyXEL Communications Corporation.
Command
[0|1]
[on/off]
<RTS threshold value>
<Fragment threshold
value>
<none|64|128|256>
Set <set> <value>
Default <set>
<allow|deny>
<Set#> <MAC Address>
[1:19dbm, 2:18dbm,
3:16dbm, 4:15dbm,
5:14dbm]
P-660 series Support Notes
Description
Turn on/off wireless lan
Show association list
Load WLAN configuration
into buffer.
Display WLAN
configuration data.
Configure channel ID?
Configure ESSID
Enable/Disable hidden SSID
Set threshold rts value
Set threshold fragmentation
value
Set WEP key to 64, 128 or
256 bits.
Set WEP key value per set
Set WEP default key set
Enable macfilter
Disable macfilter
When action match, allow or
deny this mac
Set mac address by set
Clear all WLAN
configuration data.
Save WLAN configuration
working buffer to Rom file.
Change TX power level.
Reset WLAN
Internal usage.
Show WLAN restart statistics
Set WLAN state to mix
mode, B only or G only
Show number of Rx host
descriptors
187