ZyXEL Communications P-660R-T1 Support Notes page 202

sys filter set value [(depend on length
in hex)]
sys filter set clear
sys filter set save
sys filter set display [set#][rule#]
sys filter set freememory
sys snmp disp
sys snmp get [community]
sys snmp set [community]
sys snmp trusthost [IP address]
sys snmp trap community
[community]
sys snmp trap destination [IP address] Set the destination address of trap
sys snmp discard
sys snmp clear
sys snmp save
sys password [new password]
sys baud [1-5]
sys server load
sys server access [ftp|telnet|web]
[access type]
sys server port [ftp|telnet|web] [port] Set the server port number
sys server secureip[ftp|telnet|web]
[address]
sys server disp [1]
sys server save
wlan load
All contents copyright © 2005 ZyXEL Communications Corporation.
Set the value for generic rule
Clear the current filter set
Save the filter set parameters
Display Filter set information. W/o
parameter, it will display buffer
information.
Discard Changes
Display SNMP parameters
Set the community string of get
Set the community string of set
Set the IP address of trusted host
Set the community string of trap
Discard changes
Clear Working Buffer
Set the SNMP parameters
Set system password [save immediately]
Index 12,3 will be 38400,19200, 9600,
57600, 115200 bps [save immediately]
Load setting before editing
Set the server access type to be 0: ALL,
1: None, 2:LAN only, 3:WAN only
Set the server security IP address
Display server settings, [1] means
display buffer
Save the embedded server (remote
management) parameters
Load system parameters into working
buffer
P-660 series Support Notes
Menu 21, it? for
generic filter
Menu 21
Menu 22
Menu 22 SNMP
Menu 22 SNMP
Menu 22 SNMP
Menu 22 SNMP
Menu 22 SNMP
Menu 22 SNMP
Menu 23 system
password
Menu 24.2.2
console speed
Menu 24.11
remote
management
Menu 24.11
remote
management
Menu 24.11
remote
management
Menu 3.5 for
Wireless LAN
201