Configuring Infrastructure Mode; Infrastructure Introduction; Configure Wireless Access Point To Infrastructure Mode Using Smt - ZyXEL Communications P-660R-T1 Support Notes

2. Configuring Infrastructure mode

•

Infrastructure Introduction

•
Configure wireless access point to Infrastructure mode with SMT
•
Configure wireless access point to Infrastructure mode with Web configurator
•
Configure wireless station to Infrastructure mode
Infrastructure Introduction
What is Infrastructure mode?
Infrastructure mode, sometimes referred to as Access Point mode
mode of an 802.11b/Wi-Fi client unit. In infrastructure mode, the client unit can
associate with an 802.11b/Wi-Fi Access Point and communicate with other clients in
infrastructure mode through that access point.
Configure Wireless Access Poin
To configure Infrastructure mode of your P660HW-T1 wireless AP please follow the
steps below.
1. From the SMT main menu, enter 3 to display Menu 3 ? LAN Setup.
2. Enter 5 to display Menu 3.5 ? Wireless LAN Setup.
Menu 3.5 - Wireless LAN Setup
All contents copyright © 2005 ZyXEL Communications Corporation.
t to Infrastructure mode using SMT.
P-660 series Support Notes
, is an operating
117