ZyXEL Communications P-660R-T1 Support Notes page 199

wan node wanip [static|dynamic]
[address]
wan node remoteip [address] [subnet
mask]
wan node nat [off | sua | full] [address
mapping #]
wan node rip [none|in|out|both]
[rip1|rip2b|rip2m]
wan node multicast
[none|igmpv1|igmpv2]
wan node filter [incoming|outgoing]
[tcpip|generic]
[set #1] [set #2] [set #3] [set #4]
wan node save
wan node display
ip route addrom index [Rule #]
ip route addrom name [Name]
ip route addrom active [on|off]
ip route addrom set [dest address/
mask bits] [gateway] [metric]
ip route addrom private [yes|no]
ip route addrom disp
ip route addrom freememory
ip route addrom save
ip route addrom clear [Index #]
ip nat addrmap map [map#] [set
name]
ip nat addrmap rule [rule#] [insert |
All contents copyright © 2005 ZyXEL Communications Corporation.
Set the wan IP address
Set the remote gateway IP address and
subnet mask
Set type wan NAT mode to be off or
SUA or Full feature
Set the wan RIP mode and RIP version
Set the wan IP multicast mode
Set WAN filter, incoming or outgoing
can be specified, and filter set can be
1-12, value 0 means empty
Save the related parameters of WAN
node
Display WAN profile configuration in
buffer
Select a Static Route index 1-16 to edit
Set Rule Name
Set Active or Inactive Flag
Set IP static route
Example:
> ip ro addrom set 192.168.1.33/24
192.168.1.1 2
Set Private Flag
Display both working buffer and Editing
Entry
Discard all changes
Save edited settings
Clear Static Route Index
Select NAT address mapping set and set
mapping set name, but set name is
optional
Example:
> ip nat addrmap map 1 myset
Set NAT address mapping rule. If
P-660 series Support Notes
Menu 11.3
Menu 11.3
Menu 11.3
Menu 11.3
Menu 11.3
Menu 11.5
Display Menu
11
Menu 12.1
Menu 12.1
Menu 12.1
Menu 12.1
Menu 12.1
Menu 12.1
Menu 12.1
Menu 12.1
Menu 12.1
Menu 15.1
Menu 15.1
198