ZyXEL Communications P-660R-T1 Support Notes page 47

Confi guring NAT
To co nfigure NAT, enter 15 from the Main Menu to bring up the following screen.
Menu 15 - NAT Setup
1. Address Mapping Sets
2. NAT Server Sets
Address Ma pping Sets and NAT Server Sets
Use the Ad d ress Mapping Sets menus and submen
to a ssign global addresses to LAN clients. Each remote node must specify which NAT
Address Ma pping Set to use. The P-660 has 8 remote nodes and
configure 8 NAT Address Mapping Set. You can see nine NAT Address Mapping sets
in Menu 15.1. You can only configure from Set 1 to Set 8. Set 255 is used for SUA.
When you s elect Full Feature in menu 4 or 11.3, you must ente
we ll. When you select SUA Only, the SMT will use Se
The NAT S erver Set is a list of LAN side servers m
this set (one set for the P
Mapp ing se t. Please see
Enter 1 to bring up Menu 15.1-Address Mapping Sets
Menu 15.1 - Address Mapping Sets
1.
2.
3.
4.
5.
6.
7.
8.
255. SUA (Read Only)
Enter Set Number to Edit:
All contents copyright © 2005 ZyXEL Communications Corporation.
-660), a server rule must be set up inside the NAT Address
NAT Server Sets for further information
P-660 series Support Notes
us to create th e mapping tab
so allows you to
r correct NAT Set as
t 255.
apped to external ports. To use
on these menus.
le used
46