Using Zero-Configuration - ZyXEL Communications P-660R-T1 Support Notes

Hide thumbs Also See for P-660R-T1:
Table of Contents

Advertisement

Destination
Enter the IP address of destination that meats this class.
IP Address
Destination
Enter the destination subnet mask.
Subnet Mask
Destina
tion
Enter the destinatio
Por
t
Enter the IP address of source that m
Source IP
'LAN to WAN', since BWM is before NAT, you should use the IP address
Address
before NAT
Source
Enter the destination subnet mask.
Subnet Mask
Source Port
Enter the source port number of the traffic.
Protocol ID
Enter the protocol number for the traffic. 1 for ICMP, 6 for TCP or 17 for UDP
After configuration BWM, you can check current bandwidth of the configured traffic
in ADVANCED->BWM MGMT->Monitor. The values in the column of Current
usage (kbps) would display the actually number.

15. Using Zero-Configuration

• Zero-Configuration and VC auto-hunting
Zero-Configure feature can help customer to reduce the burden of setting efforts.
Whenever system ADSL links up system will send out some probing patterns, system
will analyze the packets returned from ISP, and decide which services the ISP may
provide. Because ADSL is based on a ATM network, so system have to
pre-configured a VPI/VCI hunting pool before Auto-Configure function begins to
work.
The Zero-Configuration feature can hunt the encapsulation and VPI/VCI value, and
system will automatically configure itself if the hunting result is successfully. This
feature has two constraints:
1. It supports the ISP provides one kind of service (PPPoE/PPPoA..etc.) only,
otherwise the hunting will get confusing and failed.
2. VC auto-hunting only supports dynam
static WAN IP address. VC auto-hunting function will be disabled.
The entry of hunting pool must als
patterns you wish to send. Whenever system send out all the probing patterns with
specific VPI/VCI, system will wait for 5~10 seconds and get the response from ISP,
the response patterns w
All contents copyright © 2005 ZyXEL Communications Corporation.
n port number of the
processing.
ic WAN IP address. If the router is set a
o contain the VPI, VCI, and which kinds of hunting
ill decide which kinds of ADSL services of the line will be.
P-660 series Support Notes
traffic.
eats this class. Note that for traffic from
107

Advertisement

Table of Contents
loading

Table of Contents