Outline Drawing (Unit: Mm) - Pioneer PDP-V402 Technical Manual

How to mount standard optional items (PDA-4003)
Note 1) In case the signals for the full lines which are more than 845 lines are input, ''OUT OF RANGE'' will be indicated.
Note 2) Though it is not shown in the above table, in case the signals for the full lines which are equal to or less than 845
lines are input, the images will be shown, but there are some possibilities that the following problems might
happen:
1 The out-of-roundness may not be correct (Example: PC-9800/640 X 400 @ 56.4Hz)
2 Noise may be caused/images may be distorted.
3 Images may not be completely adjusted.
Please understand that these problems are out of the scope of our product warranty.
Moreover, in case that it is inevitable for you to input some interlaced signals, input by way of separate
synchronization.
In case you use G on Sync or composite synchronization to input, there is a chance that the resolution and
frequency of your signals may not be correctly identified.
Note 3) There are some older Macintosh PC models that can output both C on Synch and composite synchronization at
the same time. In such a case, there is a chance that the resolution and frequency of the signals may not be
correctly identified or the white balance may be disturbed. Therefore, basically, do not use such models.
Note 4) Macintosh is the registered trademark of Apple Computer Inc.
PC-9800 is the registered trademark of NEC Corporation.

4.4.2 Outline drawing (Unit: mm)

φ6×5.1
φ6
68
CL
CL
338
325.2
AAAX2750-A
SATELLITE REMOTE
DC8V 12mA MAX
OFF ON (to JA-V15IR or JA-V150IR)
DC IN 8.3V 0.8A
CL
306
DC8V
12mA MAX
0.8A
DC IN 8.3V SATELLITE REMOTE
OFF ON
22
112.7
φ5.1
φ6
RGB OUT RGB IN
RGB OUT RGB IN