Menu Mode; Various Adjustments And Setting - Pioneer PDP-V402 Technical Manual

Performing adjustments on the plasma display operation panel
and remote control

5.2 Menu mode

5.2.1 Various adjustments and setting

Remote control
MENU
Main unit
MENU
• Displayed only for RGB-1.
(PDP-V402 ONLY)
Remote control
Main unit
ADJUST
• Displayed only for RGB-1.
(PDP-V402 ONLY)
• The currently selected item will
be displayed in purple.
Remote control
SET
Main unit
SET
162
STANDBY
/ON
INPUT
MENU
ADJUST
SET
P I CTURE PARAMETER
CONTRAST
BR I GHT.
CLK. FRQ. + 1 0
CLK. PHS. – 5
HOR. POS. 0
+ 8
VER. POS.
I N I T.
SCART RGB OFF
SET : SEL. MENU : EXIT
P I CTURE PARAMETER
CONTRAST
BR I GHT.
CLK. FRQ. + 1 0
CLK. PHS. – 5
HOR. POS. 0
+ 8
VER. POS.
I N I T.
SCART RGB OFF
SET : SEL. MENU : EXIT
P I CTURE PARAMETER
CONTRAST
: ADJ. SET : EXIT
1) RGB-1 (BNC) or RGB-2 (MINI D-
SUB) Input:
Adjust the picture quality for each input: the RGB-1 (BNC),
the RGB-2 (MINI D-SUB), the video, and the Y/C.
* Refer to page 51 for the sources.
Switch to the MENU screen.
Choose the item to be adjusted.
Finalize your choice.
Make adjustment concerning each item as follows:
CONTRAST .........
picture according to the brightness of
the environment so that you can watch
the picture easier.
BRIGHT ............. Adjusts the brightness of the picture
so that you can watch the darker parts
of the picture easier.
CLK.FRQ. .......... When part of the letters in the picture
is missing, or if the displayed image is
distorted as a rainbow-like noise, use
this function. This function is to adjust
(–32 to +32)
the frequency of the internal clock signal
for the video signal input.
NOTE:
HOR.POS may need to be adjusted in
some cases if CLK.FRQ has been
adjusted.
CLK.PHS. ........... When some letters in the picture flicker
and the color becomes distorted, use
(–128 to +127)
this function. Adjust it to minimize the
flicker and the color distortion. This
function is to adjust the phase of the
internal clock signal, which is adjusted
with the CLK. FRQ function.
HOR.POS. ......... Adjust the horizontal position of the
(–32 to +32)
picture.
VER.POS. .......... Adjust the vertical position of the
(–32 to +32)
picture.
INIT. ................... Returns the above picture settings to
their center values. *1
SCART RGB .... T his switches the synchronizing signal
(ON/OFF)
mode. Always leave it OFF, except for
(Displayed only
RGB input to a unit with a Euro AV
for RGB-1)
terminal.
(PDP-V402 ONLY)
*1
When you select INIT. , the message on the right is displayed.
Select "YES" or "NO" by using the 2 or 3 button.
Selecting "YES" and pressing the SET button sets back all
picture quality settings to their default values.
When "NO" is selected, all settings will remain as they are.
P I CTURE PARAMETER
I N I T I AL I ZE?
YES NO
SET : EX I T
Adjusts the contrast of the
If "NO" has been selected,
SET:EXIT will be displayed
here.
If "YES" has been se-
lected, SET:INIT will be dis-
played.