Table of Contents
Advertisement
CONFIGURING THE CLIENT COMPUTER TO CONNECT TO THE SERVER
Note
To configure the client computer to connect to the DVXi system, complete the
following steps on the client computer:
USING THE DIAL-UP CONNECTION
To connect to the DVXi system, complete the following steps on the client
computer:
See the following sections for information on running and configuring
RemoteView.
92
The procedure for configuring a client computer to connect to a
DVXi system over a modem varies depending on the operating
system installed on the client. This section covers the procedure
used for a client computer running Windows 2000 Professional.
1.
From the Desktop, open My Computer and then open Dial-Up Net-
working.
2.
Follow the onscreen instructions. Enter the phone number for the
phone line connected to the DVXi system.
3.
After you create the connection, right-click the icon for that connection
and select Properties.
4.
Select the Server Types tab and select PPP.
5.
Select the checkbox only for TCP/IP. Deselect all other checkboxes.
6.
Click OK.
1.
Double-click the icon for the dial-up connection you created in the previ-
ous procedure.
2.
Enter the user name and password configured on the server.
3.
Click Connect. Wait for the client computer to connect to the DVXi sys-
tem.
Advertisement
Table of Contents
