Integral DVXi TS4 User Manual page 31

RESCANNING FOR CAMERAS
Any time you connect cameras to DVXi, you must inform MasterControl. On the
Hardware tab on the Setup page, click the Camera Detection button. When the
Camera Detection window appears (see Figure 12), select the input number for the
new camera and click Accept. The camera input is then represented by an active
button at the bottom of the screen, even if no camera is actually hooked up to the
input. You can also have MasterControl search for the new camera by clicking
Rescan. When you disconnect a camera, you can either click Rescan or manually
deselect the camera input from the Camera Detection window.
To have MasterControl recognize a specific camera input combination every time
you start the application, select the appropriate camera inputs and then choose Use
as the Default Configuration. Then MasterControl will skip its scan during startup
and activate all camera inputs you selected. To return to having MasterControl
scan for cameras during startup, deselect Use as the Default Configuration and
then click Accept.
Figure 12
The Camera
Detection button
calls up the
Camera Detection
window. Use this
window to inform
MasterControl of
newly connected
cameras.
28