Table of Contents
Advertisement
The plug-in runs via MCPlugin.exe, a program that starts automatically when
MasterControl is started. When started, an MCPlugin icon is located in the system
tray (refer to Figure 57). Double-click on the icon to reveal the Plugin Properties
window.
For each camera that you want the plug-in to monitor for motion events, complete
the following steps (you must be logged on to MasterControl with Administrator
or Supervisor permissions):
1.
Open the Plugin Properties window by clicking the MCPlugin icon in the
system tray, and then select the MotionAlarm tab (see Figure 62).
2.
Make sure Disable MotionAlarm is not selected.
3.
Select a camera from the Camera drop-down list.
A camera must be scheduled for motion recording, and recording
Note
must be activated, for MotionAlarm to monitor its input for motion
events.
(continued)
Figure 61
The MotionAlarm
tab allows you to
configure the DVXi
output trigger to
activate when a
motion event occurs.
121
Advertisement
Table of Contents
