Table of Contents
Advertisement
8.
Click Add to create a new user. Enter the following user information
and then click OK:
User Name: RemoteView
Full Name: RemoteView
Password: letmein
Confirm Password: letmein
9.
In the users list, select the checkbox for the RemoteView user (and
deselect all other users) and click Next.
10. Select Internet Protocol (TDP/IP) and click Properties.
11. In the Incoming TCP/IP Properties window, deselect Allow Callers
Access to My Local Area Network. Then select Specify TCP/IP
Addresses and enter the following information (when finished, click
OK and then Next):
From: 192.168.0.1
To: 192.168.0.10
12. Click Finish. Restart the DVXi system.
The DVXi system is now ready to accept incoming calls.
91
Advertisement
Table of Contents
