Integral DVXi TS4 User Manual page 16

R E A R P A N E L O F D V X i X M 16 an d D V X i X M 32
A J B
Figure 4
The rear panel of DVXi XM 16- and 32-camera systems. The placement of system
components may vary depending on which options are installed.
RACK-MOUNT INSTALLATION CONSIDERATIONS
Elevated Operating Ambient. If installed in a closed or multi-unit rack assembly, the oper-
ating ambient temperature of the rack environment may be greater than room ambient. There-
fore, consideration should be given to installing the equipment in an environment compat-
ible with the manufacturer's maximum rated ambient temperature of 32ºC.
Reduced Air Flow. Installation of the equipment in a rack should be such that the amount of
air flow required for safe operation of the equipment is not compromised.
Mechanical Loading. Mounting of the equipment in the rack should be such that a hazard-
ous condition is not achieved due to uneven mechanical loading.
Circuit Overloading. Consideration should be given to the connection of the equipment to
the supply circuit and the effect that overloading of the circuits might have on overcurrent
protection and supply wiring. Appropriate consideration of equipment nameplate ratings should
be used when addressing this concern.
Reliable Earthing. Reliable earthing of rack-mounted equipment should be maintained. Par-
ticular attention should be given to supply connections other than direct connections to the
branch circuit (e.g. use of power strips).
C D E F G H
13