Integral DVXi TS4 User Manual page 67

CONTROLLING PTZ
Note
MasterControl allows you to control PTZ cameras configured on the PTZ tab of
the Setup page. If your DVXi system includes the PTZ option, the Monitor page
contains two additional tabs: PTZ and PTZ Settings. To see these tabs, click the
right arrow beside the Main and Outputs tabs on the Monitor page.
To control a PTZ camera, select its video window and then the PTZ tab (see Figure
28). The tab allows you to control the pan/tilt/zoom functions of the camera by
clicking and dragging arrows or the center joystick. You can also control focus,
iris, and zoom settings. The six preset buttons allow you to quickly view any of the
first six presets configured on the PTZ Settings tab.
Figure 28
The PTZ tab on the
Monitor page allows
you to control PTZ
cameras.
Tip
64
PTZ and the PTZ tab are available only as an option. If you did not
purchase the PTZ option with your DVXi system, the PTZ tab does
not appear on the Setup page.
If you install a mouse with a wheel control, you can wheel foward to
zoom in and wheel backward to zoom out.
You can also make any type of mouse function like a joystick by
holding the Ctrl key and clicking once on the center joystick. You
can then move the mouse (without clicking) to control PTZ. To can-
cel this function, click the left mouse button.