EXAMPLE—SETTING A TYPICAL SCHEDULE
Suppose that your office follows a schedule of 6 a.m. to 6 p.m. Monday through
Friday and you want to capture motion events during office hours and alarm events
during off hours. On weekends and certain holidays, the office is closed, and you
want to capture alarm events those entire days.
To create this schedule, you would perform the following steps:
PART I—Setting the weekday default
1.
Go to the Schedule page.
2.
If you have created any custom schedules that you no longer need, go to
the Clear Schedule area, select All Custom Schedules, and click Clear.
3.
Click on any weekday in the calendar.
4.
Draw schedule boxes to reflect the weekday schedule.
5.
In the Schedule Mode section, choose Weekday Default from the drop-
down list. Then click Apply.
Figure 33
This figure illus-
trates setting the
weekday default
schedule (part I,
step 5).
75