Table of Contents
Advertisement
The PTZ Settings tab (see Figure 29) allows you to control the following features
of a PTZ camera selected on the Monitor page:
•
The Camera Speed drop-down box controls the speed at which functions
occur when selected. For example, if you select Fast, the camera will pan
quickly when you click and drag an arrow or the joystick. Five speeds are
available.
•
Camera Presets allows you to configure camera views that you can quickly
call at any time. To configure a preset, select the camera's video window
and use the PTZ tab controls to set the camera to the desired view. On the
PTZ Settings tab, select a preset number and click Set (the number of
presets available depends on the camera type). To view the preset at any
time, select the camera preset number and click Call. Presets 1–6 are also
quickly viewable on the PTZ tab by selecting the appropriate preset num-
ber button. The Alarms tab on the Setup page allows you to configure a
camera to call a preset automatically upon alarm.
•
The Start Pattern button starts the PTZ preset tour configured on the PTZ
tab on the Setup page.
Tip
When a PTZ error occurs, the MCNotify log icon in the MasterControl
icon tray changes to a camera icon with a red background. A user
with the appropriate permission level can double-click the icon to
view the log, which contains specific information about the PTZ er-
ror (along with other logged information).
Figure 29
The PTZ Settings
tab on the Monitor
page allows you to
configure presets on
your PTZ cameras.
65
Advertisement
Table of Contents
