Let's Talk Technical - Vax Power U84-M1-Be Let's Get Started

IMPORTANT: Unplug and switch off vacuum cleaner before performing maintenance or troubleshooting checks.
Removing debris from the brushbar
Removing blockages from the TurboTool
Slide the locking ring
to remove.
Removing a blockage from the hose
Press the release clip
on the stretch hose, pull
and remove hose from
the handle.
Using a pair of scissors
remove any threads or
hair caught around the
brush bar.
Lift and separate the
housing. Using a pair
of scissors remove any
threads or hair caught
around the brushbar.
Insert a broom handle or
similar blunt instrument into
the hose to remove blockage.

Let's talk technical

Line up the tabs on front
of housing and re-fi t.
Slide locking ring into
groove to secure.
To test for a blockage
in hose, drop a small
ball of paper through
the hose. The paper
will drop through
if the hose is clear.