NOTE: This will be attached to the TurboTool) TurboTool holder (some models only) PLEASE NOTE: Some parts may vary according to model. Please check inside flap of box for more details. U88-W1-B White Bagless Upright UG 10.04.12.indd 2 04/05/2012 16:24...
See Maintenance; Clearing Blockages. IMPORTANT: Cleaning filters maintains vacuum performance. Vax recommends that your filters should be checked and cleaned at least every 3 months (depending on the level of use). If your filters are washable make sure they are completely dry before inserting back into the vacuum cleaner.
Connect the upper hose to the Insert the lower hose to the lower Place the 2-in-1 tool into the upper hose connector, rotate hose hose connector. holder. clockwise to secure. U88-W1-B White Bagless Upright UG 10.04.12.indd 4 04/05/2012 16:24...
Page 5
Attaching the TurboTool holder Attach the TurboTool holder to handle. Then fit the Turbotool to the TurboTool holder. vax.co.uk U88-W1-B White Bagless Upright UG 10.04.12.indd 5 04/05/2012 16:24...
Low – short carpet pile. Hard floors Place foot on the vacuum to Place foot on the on/off button to recline the vacuum body as switch the vacuum cleaner on. desired. U88-W1-B White Bagless Upright UG 10.04.12.indd 6 04/05/2012 16:24...
IMPORTANT: When the vacuum cleaner is stood in the upright position, or when using the hose and tools, the brush bar height adjust must be set to the highest position. vax.co.uk U88-W1-B White Bagless Upright UG 10.04.12.indd 7 04/05/2012 16:24...
Cleaning the separator Turn the lid of the dirt container Wipe the separator with a cloth to anticlockwise to remove. remove any dirt. U88-W1-B White Bagless Upright UG 10.04.12.indd 8 04/05/2012 16:24...
IMPORTANT: It is very important to keep the filters clean to maintain Cleaning the HEPA filter maximum performance of the vacuum. Vax recommend that your filters should be cleaned at least every 3 months (depending on the level of use). Do not use detergent to clean the filters.
Next, remove the belt from screwdriver as indicated by arrows. the brushbar and from the motor spindle towards the rear of the floor head. Replace the belt. U88-W1-B White Bagless Upright UG 10.04.12.indd 10 04/05/2012 16:24...
Page 11
Why won’t the accessories pick up properly? • H ose blockages: remove the hose from the unit. Carefully remove any blockages found and reconnect hose securely. • A ccessory blockages: remove accessory from handle/tube. Carefully remove blockage and re- attach to the vacuum cleaner. • The accessory may be faulty. Simply call us on 0844 412 8455 for assistance. vax.co.uk U88-W1-B White Bagless Upright UG 10.04.12.indd 11 04/05/2012 16:24...
Service & Help Any queries or concerns about using your Vax, simply visit; vax.co.uk/support - vaxireland.ie or, call the Vax Careline. Calls are charged at the UK local rate. Please make a note of the serial number and model number of the vacuum cleaner before calling.
Page 13
Notes vax.co.uk U88-W1-B White Bagless Upright UG 10.04.12.indd 13 04/05/2012 16:24...
Page 14
Notes U88-W1-B White Bagless Upright UG 10.04.12.indd 14 04/05/2012 16:24...
Page 15
Notes vax.co.uk U88-W1-B White Bagless Upright UG 10.04.12.indd 15 04/05/2012 16:24...
Page 16
COMMERCIAL Vax Ltd., Kingswood Road, Hampton Lovett, Droitwich, Worcestershire, WR9 0QH, UK email: info@vax.co.uk website: vax.co.uk Performance is everything. Version 1.0 U88-W1-B White Bagless Upright UG 10.04.12.indd 16 04/05/2012 16:24...
Need help?
Do you have a question about the U88-W1 and is the answer not in the manual?
Questions and answers