Using your machine
IMPORTANT: Always switch off the vacuum cleaner before disconnecting or connecting the hose and accessories.
The accessories can be attached to the handle or directly to the hose.
When using accessories on the hose/handle raise the height adjuster to the highest setting.
Plug vacuum cleaner into
the mains and switch on.
Using the hard fl oor tool
Lie vacuum cleaner on its
back exposing the brush bar.
Turn height adjuster dial
to desired setting.
Line up fl oor tool with the base of the vacuum cleaner, push until it clicks into place.
Place foot on fl oorhead
and pull handle to recline.
Press the on/off pedal
to switch on.
To make sure the fl oor
tool is correctly fi tted,
the wheels should
be towards the back
of the fl oor tool
when attached to
vacuum cleaner.