Advertisement
Let's talk technical
CAUTION: Always unplug the carpet washer before performing any maintenance/troubleshooting checks.
Cleaning the SpinScrub brushes
Remove the tanks and lie
the washer on its back
exposing the SpinScrub
brushes.
Leave the brushes to fully
dry before reassembling.
Push the cover onto the
clips until they click into
place.
Firmly pull the sides of
the SpinScrub brushes
to remove.
Line up the spindle
and tabs on the side of
SpinScrub brushes into
carpet washer, push
firmly until it clicks into
place.
Depress the clips to
release the SpinScrub
cover and firmly pull the
cover to remove.
The SpinScrub brushes
can be removed and
cleared of any debris/
threads or hair. Rinse
under water to remove
debris.
Hide quick links:
Advertisement
