Subscribe to Our Youtube Channel
Related Manuals for Vax U91-MA-Be
Summary of Contents for Vax U91-MA-Be
- Page 1 POWERFUL, LIGHTWEIGHT, FULL SIZE LET’S GET STARTED. U91-MA-Be U87-MA-Pe U90-MA-Re U89-MA-Le U89-MA-PFe U89-MA-Te VRS115 VRS116...
- Page 2 • Only Vax recommended tools should be used with this vacuum cleaner. • Keep fingers, hair and loose clothing away from moving parts and openings whilst using the vacuum cleaner.
- Page 3 Maintaining your carpets and hard floors will ensure they keep their appearance for longer. Upholstery Tool Getting to know your machine You’ve chosen the carpets and hard floors for your home for a reason and Vax will help you take good care of them. Pre-motor Filter Getting started Taking care of your Air™...
-
Page 4: Getting Started
NOTE: The brushbar will not spin until the machine is reclined. 1-1-134530 1-1-131394 Weight 4.9kg 3-in-1 tool IMPORTANT: Switching the brushbar on whilst cleaning hard floors may damage flooring. 1-1-129167 Subject to technical change without notice. To purchase consumables and accessories, please visit vax.co.uk... - Page 5 Using your machine Taking care of your machine How to use the air vent Before you begin cleaning • Always switch off and unplug the vacuum cleaner before connecting or disconnecting the hose/attachments, or removing and emptying the dirt container. •...
- Page 6 Taking care of your machine Taking care of your machine Cleaning the shroud CAUTION: To reduce the risk of electric shock, turn the vacuum cleaner off and unplug from the electrical outlet before performing maintenance/troubleshooting checks. Removing debris from the brushbar Turn the dirt container lid Tap over a bin to remove Brush dirt from the shroud.
- Page 7 Taking care of your machine Accessories Don’t forget your accessories! Removing blockages from the TurboTool Order at: www.vax.co.uk/spares-and-solutions TurboTool (Type 6) 1-1-134419 Use the TurboTool for vacuuming your stairs, upholstery and car interiors. It’s great for Turn the TurboTool over and...
- Page 8 • The belt may be broken. Go to ‘Let’s talk technical’. My brushbar isn’t turning. Registration required. Terms and conditions apply, see vax.co.uk for details. † IMPORTANT: To reduce the risk of personal injury, unplug the vacuum before performing maintenance/troubleshooting checks.
- Page 9 Local Authority or retailer for recycling advice. © 2015 Vax Limited. All rights reserved. The VAX trade mark and Vax lozenge is the property of Techtronic Floor Care Technology Ltd and is registered in the EU and may be pending or registered in other countries.
Need help?
Do you have a question about the U91-MA-Be and is the answer not in the manual?
Questions and answers
How can I remove brush container and brush to clean out properly and not just cut with scissors? I have U89-MA-Le. Thank you
To remove the brush container and brush for cleaning on a Vax U91-MA-Be:
1. Unplug and switch off the vacuum cleaner.
2. Use a crosshead screwdriver to remove 3 screws from the side plate of the floorhead.
3. Remove the end cap belt cover.
4. Remove the brushbar location plate to gain access to the belt.
5. Remove the brushbar.
6. Use scissors to cut and remove any hair or debris from around the brushbar.
Reassemble in reverse order after cleaning.
This answer is automatically generated
HOW TO FIT A BELT
To fit a belt on a Vax U91-MA-Be vacuum cleaner:
1. Unplug and switch off the vacuum cleaner for safety.
2. Remove the end cap belt cover using a crosshead screwdriver.
3. Remove the brushbar location plate by unscrewing three screws from the side of the floorhead.
4. Take out the old belt and replace it with the new one.
5. Ensure the teeth of the belt are fully engaged with the cogs.
6. Reassemble the parts by securing the brushbar location plate and end cap belt cover.
7. Tighten the screws and check that the belt is properly fitted before use.
This answer is automatically generated