Advertisement
Cleaning blockage for the brushbar
If the brushbar has been
obstructed, the motor
protection sensor may have
been activated. Clear any
obstruction from the brushbar,
stand the machine onto the
docking station and wait
30 minutes for the vacuum
cleaner to reset itself.
Changing the brushbar
Turn the lock release to unlock
the fl oorhead cover. Lift and
remove fl oorhead cover.
Don't forget your accessories!
AU: www.vax.com.au / NZ: www.vax.co.nz
Pre-motor fi lter
Model No. VX42F
Let's talk technical/Accessories
Using a pair of scissors
remove any threads or hair
caught around the brushbar.
Remove brush bar by lifting side
of brushbar not connected to the
spindle fi rst.
Replace the brushbar. Fitting
the spindle side fi rst, line up
and push the brushbar into
the spindle. Push the other
side of the brushbar back into
the fl oorhead and refi t the
fl oorhead cover.
Advertisement
