Vax Power U84-M1-Be Let's Get Started page 9

IMPORTANT: Always switch off the vacuum cleaner before disconnecting or connecting the hose and accessories.
The accessories can be attached directly to the hose.
This vacuum cleaner is fi tted with a constantly rotating brush bar. To avoid damage to your fl ooring, make sure the brush
bar is raised to the highest setting when using the accessories.
Using the hose and accessories
Pull and release the stretch
hose from hose guides.
Push and attach the 2-in-1
crevice/dusting brush,
TurboTool or Above Floor
Tool (some models only)
onto the end of the
stretch hose.
Unclip the hose end on
the accessory hose. Pull
and remove accessory
hose from the base of
vacuum cleaner.
Turn the brushbar height
adjuster dial to highest
setting before pressing the
on/off pedal to switch the
vacuum on.
Using your machine
Line up and push the end
of the stretch hose onto
the accessory hose until
it clicks into place.
Press the release clip
on the stretch hose,
pull and remove stretch
hose from handle.