Restore Factory Default Setting - Grandstream Networks GXP – 2000 User Manual

Restore Factory Default Setting

WA RN NG: I Restoring the Factory Default Setting will delete all configuration information
Please backup or print all the settings before you restoring factory default settings. Gran
resp onsible for restoring lost parameters and cannot connect to your VoIP service provider.
Dire ctions for Restoration:
Disc onnect network cable and power cycle the unit before resetting factory d
1. Step 1: Press "OK" key to bring up the k
"OK" to enter submenu, select "Factory Re
2. Step 2: Key in the MAC address printed on the bottom of the sticker. Please use the following
mappin g:
0 - 9 : 0 - 9
a. A: 22 (press the "2" key twice, "A" will show on the LCD)
b. B: 222
c. C: 2222
d. D: 33 (press the "3" key twice, "D" will
e. E: 333
f. F: 3333
For example: if the MAC address is 000b
NOTE: If there are digits like "22" in the MAC, you need to type "2" then press "->" right arrow key to
move the cursor or wait for 4 seconds to continue to key in another "2".
3. Step 3: Press the "OK" key again to move the cursor to "OK" button. Press "OK" key again to
confirm. If the MAC address is corre
keypad menu interface.
Grandstream Networks, Inc.
ey pad configuration UI me
set" (Please refer to Table 5-1 of keypad flow chart)
show on the LCD)
8200e395, it should be key in as "0002228200333395".
ct, the phone will reboot. Otherwise, it will exit to previous
GXP-2000 Users Manual
Firmware 1.1.1.14
of the phone.
dstream is not
efault settings.
nu, select "Config", press
Page 29 of 33
Last Updated: 12/2006