Getting Familiar with the System
Before setting up your system, you should become familiar with the system's
features, such as the location of your system's front and rear panel switches,
indicators and connectors, etc. Note that this section describes the tower-based
system controls (switches and indicators) and connectors, which are identical for
the rack-mount system.
Front View with Front Door Closed
This figure shows the location of the front system features (tower-based system
only).
A.
System indicators
B.
Keylock
2-8 Setting Up the System
Front Features
(See "Front View with Front Door
Opened" later in this chapter).
When locked, secures the front door
not allowing access to the front system
controls.