Replace The Sg20B Scanner Battery - Intermec SG20B User Manual

Replace the SG20B Scanner Battery

SG20B Scanner + Bluetooth Base Station User's Guide
Chapter 6 — Troubleshoot and Maintain the Scanner and Base Station
Intermec Technologies Corp.
Everett, WA 98203
MODEL, , : SG20 5V 1.7A
IC: ICES-003 CLASS B
IC: 1223A-BTM311 ANATEL: 1192-06-0569
Contains TX FCC ID: HN2-BTM311
MEX SCT RCPACBT05-068
Made in Singapore
BDA: XXXXXXXXXXXXXXX
MFD , : YY/MM/DD
CN: SG20T1D-XXXXXX
12584563214587
If your scanner flashes a battery fault signal (blinking amber LED), it
is possible to order a new battery pack (P/N BP-SG20-xxx) and replace
the defective battery by the new one.
Note: Intermec recommends that the battery be changed by a certified
technician.
Always fully charge a new battery in your SG20B scanner before using
it. Batteries can be charged after a partial discharge without affecting
the original battery capacity. A fully discharged battery charges in
approximately 3 hours.
You can charge the battery with one of these accessories:
• SG20B Charge Base (P/N CB-SG20-xxx)
• SG20 Bluetooth Base Station (P/N BB-SG20-xxx)
Intermec Technologies Corp.
Everett, WA 98203
MODEL, , : SG20B
5V 1.7A
IC: ICES-003 CLASS B
Made in Singapore
BDA: XXXXXXXXXXXXXXX
MFD , : YY/MM/DD
CN: SG20B1D-XXXXXX
12584563214587
Reset Button
83