5. Mount the control horns and servo arms following
the same steps used with the stab.
6. Glue the white nylon anti-rotation dowels in the
wing with epoxy.
7. Repeat steps 1-6 for the other wing.
ASSEMBLE THE FUSE
Install the Tail Gear
1. Grind flat spots on the tail gear wire for the set screws.
Assemble the tail gear as shown in the photo with threadlocker.
2. Remove the covering for the tail gear mounting bolts.
Attach the tail gear with threadlocker, 4-40 x 3/4" [19mm]
SHCS, #4 flat washer and #4 lock washer.
3. Attach the tail gear steering arm to the bottom of the
rudder with two #4 x 5/8" wood screws.
12