Hard Drive/Ssd Cage; Removing A Hard Drive/Ssd Cage - Dell PowerEdge M830 Owner's Manual

Steps
Insert the SSD into the SSD carrier with the connector end of the SSD toward the back. When aligned
correctly, the back of the SSD is flush with the back of the SSD carrier.

Hard drive/SSD cage

Removing a hard drive/SSD cage

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
NOTE: You must remove the hard drive/SSD cage to replace a faulty hard drive/SSD cage or service
other components inside the system.
1. Ensure that you read the
2. Follow the procedure listed in
3. Keep the #1 Phillips screwdriver ready.
4. Remove the hard drive(s)/SSD(s).
5. Remove the hard drive/SSD backplane.
Steps
1. Remove the five screws securing hard drive/SSD cage to the chassis.
2. Holding the hard drive/SSD cage by its edges, lift it away from the system.
86
Safety instructions.
Before working inside your system.