Installing The Pcie Mezzanine Card Support Bracket - Dell PowerEdge M830 Owner's Manual

Figure 13. Removing and installing the PCIe mezzanine card support bracket
1. screw
3. tab on the bracket (2)
5. system board
Next steps
1. Install the PCIe mezzanine card support bracket.
Related Links

Installing the PCIe mezzanine card support bracket

Installing the PCIe mezzanine card support bracket
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1. Ensure that you read the
2. Keep the #2 Phillips screwdriver ready.
3. Remove the PCIe mezzanine card support bracket.
NOTE: You must remove the PCIe mezzanine card support bracket to replace a faulty system board.
Safety instructions.
2. PCIe mezzanine card support bracket
4. slot on the system (2)
59