Dell PowerEdge M830 Owner's Manual page 69

Hide thumbs Also See for PowerEdge M830:
Table of Contents

Advertisement

1.
Ensure that you read the
2.
Follow the procedure listed in
3.
Keep the #2 Phillips screwdriver ready.
4.
Remove the PCIe mezzanine card.
Steps
1.
Remove the two screws that secure the Network Daughter Card (NDC) to the system board.
CAUTION: To prevent damage to the NDC, hold the card only by its edges.
2.
Lift the card away from the system.
Figure 19. Removing and installing the NDC
1.
slot on the NDC
3.
NDC
5.
connector
Next steps
1.
Install the NDC.
Related Links
Installing the Network Daughter Card
Removing a server module
Removing the system cover
Safety
instructions.
Before working inside your
system.
2.
screw (2)
4.
standoff (2)
6.
tab projections
69

Advertisement

Table of Contents
loading

Table of Contents