Warning Indicators; Lan Indicators; Hard-Drive Indicators - Dell PowerVault 715N Service Manual

Green indicates normal operation.
Flashing amber indicates a system failure.

Warning Indicators

Any pattern or color indicates a system error. See
information about possible system errors.
Off indicates normal operation.

LAN Indicators

LAN 1 LED
Green indicates that the system is connected to the network through the LAN 1 port.
Flashing green indicates that activity between the system and other devices on the network.
Off indicates that the system is disconnected from the network or that the LAN 1 port is not working properly.
LAN 2 LED
Green indicates that the system is connected to the network through the LAN 2 port.
Flashing green indicates that activity between the system and other devices on the network.
Off indicates that the system is disconnected from the network or that the LAN 2 port is not working properly.

Hard-Drive Indicators

Each hard drive has two LED indicators, an operation LED on the left side and an activity LED on the right side. LEDs are
visible when the bezel is attached to the front of the system. The LEDs provide the following information for each drive:
Green on the operation LED indicates that the hard drive is installed in the drive bay and working.
Amber on this LED indicates that the hard drive is installed in the bay, but it is not working properly.
Flashing amber on the activity LED indicates that read or write activity is occurring on the hard drive.
Back to Contents Page
"System Messages" and "System Beep Codes" for more