Installing Memory Modules - Dell PowerEdge M830 Owner's Manual

2. Follow the procedure listed in
3. Remove the cooling shroud.
Steps
1. Locate the appropriate memory-module socket(s).
2. To release the memory module from the socket, simultaneously press the ejectors on both ends of
the memory-module socket.
CAUTION: Handle each memory module only by the card edges, making sure not to touch
the middle of the memory module or metallic contacts.
3. Remove the memory module from the socket.
Figure 11. Removing the memory module
1. memory module
3. memory-module ejector (2)
Next steps
1. If you are removing the memory module permanently, install a memory-module blank. If you are
installing a new memory module, see
2. Follow the procedure listed in

Installing memory modules

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
Before working inside your
Installing memory
After working inside your
system.
2. memory-module socket
modules.
system.
51